Pneumatic strapping tool for steel strap

MAXImum manageability in the smallest space
Get maximum leeway even in small spaces - with MAXI-LAH. Based on MAXI, it combines a pneumatically generated tensioning force of up to 4,000 N with optimum handling characteristics, intuitive operation and ergonomic design.
It works without disturbing hoses; only the connection to the periphery is visible from outside. Joining takes place with seal and notch.
MAXI-LAH can process strap widths of 13, 16 and 19 mm. With 4.2 kg net, it is a real lightweight in its class. The distinctive feature of the MAXI-LAH: The air connection is on the back.
Therefore, it offers the usual handling advantages even under special conditions.

Technical Data
Kind of drive (tensioning) Pneumatic
Tension force max. 4,000 N (adjustable)
Kind of drive (sealing) Pneumatic
RS 13 ; 16 ; 19
Strap feeding speed 0.36 ft/s
Dimensions 12.6 x 5.7 x 8.7" (L x W x H)
Weight 9.9 lb
Air pressure max. 4.0 bar flow pressure (for 1/2 " strap)

max. 5.0 bar flow pressure (for 5/8 " strap)

max. 6.0 bar flow pressure (for 3/4 " strap)
Air consumption
(during tensioning)
5 Nl / s
Air consumption
(during sealing)
4 Nl / s
Cross-section G 1/4 "
Handarm vibration information currently not available
Noise level 76 dB (A)
Type of strap Steel strap
Strap Automatenband
Strap width 1/2" ; 5/8" ; 3/4"
Strap thickness 0.016 - 0.024" (for Automatenband)
0.016 - 0.025" (for MEGABAND®)
Kind of seal Seal-joint (single notch)
Sealing strength
(depending on strap quality, strap dimensions)
up to approx. 50% of the strap breaking load
Strapping of round and flat packages (e.g. sectional steel, bundles, pipes, coils, etc.) for stationary use, with compressed-air supply (LAH) rear.