Minimal effort for high-performance strap
The HKE-HD is a special tool for using straps with a width of 19 mm and thickness from 0.6 to 0.8 mm.
Processing such straps requires of course a little more effort than processing standard straps. The HKE-HD has a more voluminous body than its little brother, the HKE-L, to master the heavier loads with even more confidence. The longer levers make the job easier.
Apart from that, the typical HKE advantages are retained in the HD version: the TITAN-typical sealless joint with three notches is particularly suitable for flat packages.
Further advantages are the minimal risk of injury from this joint and the use of the HKE-HD in mobile applications. The HKE-HD is flexible enough for use in mobile applications.
|Technical Data |
|Kind of drive (tensioning) ||Manually |
|Tension force ||up to approx. 6,000 N |
|Kind of drive (sealing) ||Manually |
|Dimensions ||22.4 x 5.1 x 7.5" (L x W x H) |
|Weight ||9.3 lb |
|Type of strap ||Steel strap |
|Strap ||Automatenband |
up to approx. 900 N/mm²
up to approx. 1.100 N/mm²
|Strap width ||3/4" |
|Strap thickness ||0.024 - 0.031" |
|Kind of seal ||Sealless-joint |
|Sealing strength |
(depending on strap quality, strap dimensions)
|to approx. 75% of the strap breaking load |
|Minimum bearing area |
|Flat package ||5.9" |
|Strapping of flat packages (e.g. palletized goods) for mobile use. |