Lots of force, no seal
The use of seals for joining is an established method and simply indispensable in many industries.
Nevertheless, the seal joint could also be an avoidable cost factor; therefore, TITAN offers its patented sealless joint as an alternative.
The VS11-L works with this type of joining for optimum processing of packaging steel straps up to 19 mm width on flat packages.
The pneumatic VS11-L is a robust, reliable and easy-to-maintain head for a wide range of applications, with a tensioning force of up to 10,000 N and high joint strength.

Technical Data
Kind of drive Electro pneumatic
Tension force 1,500 - 10,000 N (adjustable)
Mains voltage 400 V AC / 50 Hz
Control voltage 24 V
Strap conveying speed approx. 7.2 ft/s with 0.02" strap thickness

approx. 6.6 ft/s with 0.025" strap thickness
Dimensions 27. 6 x 15.7 x 23.6" (L x W x H)
Weight 264.5 lb
Air pressure min. 5 bar flow pressure
max. 6 bar
Air consumption
(depending on channel size)
approx. 3.5 - 10.6 ft³ per strapping
Cross-section 1/2"
Type of strap Steel strap
Strap Automatenband
Strap width 1/2" ; 5/8" ; 3/4"
Strap thickness 0.02 - 0.024"
Kind of seal Sealless-joint
Sealing strength
(depending on strap quality, strap dimensions)
up to 75 - 85% of the strap breaking load
Minimum bearing area
Expansive package 4.7"
Slit coil ring 4.7"
Hexagon pipe bundle 5.5"
Round package Ø 19.7"
Light-duty strapping applications; for strapping of slit coils, sheet packages, bricks, structural timber, bundles of profiles, etc.