Minimal effort for high-performance strapThe HKE-HD is a special tool for using straps with a width of 19 mm and thickness from 0.6 to 0.8 mm.
Processing such straps requires of course a little more effort than processing standard straps. The HKE-HD has a more voluminous body than its little brother, the HKE-L, to master the heavier loads with even more confidence. The longer levers make the job easier.
Apart from that, the typical HKE advantages are retained in the HD version: the TITAN-typical sealless joint with three notches is particularly suitable for flat packages.
Further advantages are the minimal risk of injury from this joint and the use of the HKE-HD in mobile applications. The HKE-HD is flexible enough for use in mobile applications.
Technical Data | |
Kind of drive (tensioning) | Manually |
Tension force | up to approx. 6,000 N |
Kind of drive (sealing) | Manually |
Dimensions | 22.4 x 5.1 x 7.5" (L x W x H) |
Weight | 9.3 lb |
Strap/Joint | |
Type of strap | Steel strap
|
Strap | Automatenband
up to approx. 900 N/mm²
tensile strength MEGABAND®
up to approx. 1.100 N/mm²
tensile strength
|
Strap width | 3/4"
|
Strap thickness | 0.024 - 0.031"
|
Kind of seal | Sealless-joint
|
Sealing strength
(depending on strap quality, strap dimensions) | to approx. 75% of the strap breaking load
|
Minimum bearing area | |
Flat package | 5.9" |
Application |
Strapping of flat packages (e.g. palletized goods) for mobile use. |